Installation Guide

Measure and mark the fixed panel location.
Use a level and mark a line up the wall and along the
floor. This is your center line for the clips.
Tip: We recommend using a pencil
so this can be easily removed.
01 02
Mark the four clip locations.
A 70" from the floor, up the vertical line.
B 8" from the floor, up the vertical line.
C 3 ½" out from the wall on the floor.
D Measure width of fixed panel and subtract
3 ½" – measure this distance out from wall and
mark on floor.
W– 3 ½" from outer edge
of glass width
3 ½" from wall
8"
70"
Important: This panel is fully reversible
and can be installed on right or le
hand wall as needed.