Installation Guide

Caution: The most fragile parts of tempered glass panels are the corners. Therefore,
it is critical you have the rubber blocks in place so the glass never touches the tile
surface you are installing onto. Please make sure the glass is always on cardboard
packaging or rubber blocks while out of the packaging prior/during install. Rubber
block is provided in your hardware pack however you can use wood, cardboard or
other rubber products to protect against breakage.
Aention installer: A light haze or smudging may be present on the coated glass
panels upon delivery. This is easily removed with denatured or isopropyl alcohol and
a good quality microfiber cloth, followed by a rinse of water. This can be done before
or aer installation.
If for any reason you are having trouble with installation, or if the size of
the product does not fit your designated space, please contact Glass
Warehouse directly and do not return this product to place of purchase.
We will be able to exchange the panels or parts to suit your opening.
Glass Warehouse takes pride in providing quality products and customer
service. We want to ensure your happiness with your purchase for years
to come. We have an extensive range of sizes, so no maer what your
measurements are, Glass Warehouse can supply the panel to fit!
If you have any questions, please do not hesitate to reach out to us.
Thank you again for choosing Glass Warehouse!
Best Regards,
The Team at Glass Warehouse
Glass Warehouse, LLC
[phone]
[e-mail]
Thank you
for your purchase.
Caution: The French Silk Screen on our FSS Panels is a baked on, ceramic, mae
black framing. This framing needs to be on the exterior of your shower enclosure once
installed. The interior of the glass panel is coated with protective ENDURO SHIELD®,
which will facilitate care and cleaning of your shower panel. This ENDURO SHIELD®
coated side of your glass panel should face the interior/water side of your enclosure.