Installation Guide

PART FOUR – Install Door Panel
1. Attach the hinges to the hinge panel.
a. Ensure you have the hinges placed in the correct direction. The side of
the hinge with the solid plate is attached to the hinge panel. The side
with the screws of the hinges should be on the inside of the shower
enclosure.
b. Lightly tighten each screw with the allen keys provided so the hinges
are lightly secure only.
TIP: Center each hinge to the cutout allowing some space to adjust the
height of the door panel once installed.
2. Attach the door handle to the door panel.
IMPORTANT: Ensure the handle is rmly attached.
TIP: Most DIY-ers won’t have professional suction/vacuum equipment to
lift the glass, so this is why we recommend attaching the door handle rst
so when lifting the glass you have something secure to hold onto.
3. Take o the backing plates o the hinges on the door side.