Installation Guide

Tip: We recommend using a pencil
so this can be easily removed.
01 02
33 ⅞"
Fixed return wallHinge panel wall
33 ⅞"
7 ¾"
44 ½"
70 ¼"
47 ⅞"
47 ⅞"
44 ½"
Measure and mark the fixed return panel location.
Measure 47⅞" out from the hinge panel wall. This takes
you to the center line of the return panel location. Use a
level and mark a line up the wall and along the floor. This
is your center line for the clips.
Mark the three clip locations.
A 70 ¼" from the floor, up the vertical line.
B 7 ¾" from the floor, up the vertical line.
C 44 ½" from return panel wall, along the floor line.