Installation Guide

Install Boom Rollers on Exterior Panel
Prepare 2 Boom Rollers by removing Exterior Plate.
Begin with roller aligned with flat area parallel to top of
Door Panel. Insert Roller into boom holes in Exterior
Panel and reaach Interior Plate.
If you need to lower the Door Panel to access the holes
to install the boom rollers, use the Spanner Wrench to
loosen the top rollers and the Open Wrench to adjust
and lower the Door Panel for beer access.
23 242221
Adjust Wheel Position snug to Shower Rod
Using Spanner Wrench and Open Ended Wrench, adjust
wheel position to make Boom Roller snug to Shower
Rod. Reinstall Exterior Cover Plates to all 4 Rollers.
Position and secure Stoppers
Open each Door Panel to maximum open position.
Once in maximum open position, tighten each Stopper
in place.
Prepare Towel Bar Handles for installation
Unpack Towel Bars and unscrew mounting hardware
from each end of Towel Bar keeping all pieces
conveniently nearby.