Installation Guide
775⁄8"
27 282625
Remove
adhesive
backing
Remove
adhesive
backing
Install Towel Bar Handles on Glass Panels
Reinstall hardware on to Door Panels as shown above.
Interior Door Panel will have Towel Bar on the inside of
the shower. Exterior Door Panel will have Towel Bar on
the exterior of shower. Tighten completely using allen
wrench in the hole on mounting post.
Trim the L-shaped Seals
Measure and cut L Seals to match the 77⁄" height of
the Door Panels.
Aach L Seals on wall side of each Door Panel
Align L Seal to top of the Door Panel and temporarily
aach using painter's tape.
Install the L-shaped Seals
Remove protective liner from L Seal and close Door
Panel so L Seal adheres to wall. Remove Painter's tape
from the Door Panel and L Seal. Open the Door Panel
and push the L Seal firmly into place to secure.