User manual

8615 Touch Monitor
User’s Manual
1. SCOPE
This specification describes a full range of AC input voltage with single output
voltage switching power adapter.
2. ELECTRICAL SPECIFICATION
2.1. AC INPUT REQUIREMENTS
2.1.1. INPUT VOLTAGE
The operating range of the power adapter is 90 to 264Vac.
2.1.2. INPUT FREQUENCY
The input frequency range is 47 to 63 Hz.
2.1.3. EFFICIENCY
The power adapter efficiency is 80% min. At full load and with 115Vac
input.
2.1.4. INRUSH CURRENT
No Damage (Cold Start ).
2.1.5. MAX. INPUT AC CURRENT
1.7A @90Vac,0.85A @180Vac.
2.2. DC OUTPUT REQUIREMENTS
2.2.1. OUTPUT VOLTAGE
The output voltage under all conditions of rated input voltages and frequencies,
of output loads from minimum to maximum of environmental requirements
shall remain within the following limit:
Normal Voltage Limit
+12.0V 11.5 to 12.5
The output voltage is measured at the connector at the output end of the cable.
48