5"Touch Monitor SERIES 8615 Operation Manual Version 1.
User’s Manual 8615 Touch Monitor Table of Contents: Chapter 1 Specification Introduction ...............................................................2 Chapter 2 Appearance .......................................................................................3 Chapter 3 OSD Setup..........................................................................................5 Chapter 4 Installation .......................................................................................
User’s Manual 8615 Touch Monitor CHAPTER 1 Specification Introduction Preview The new touch monitor, 8615, is designed with the option of integrated Smart Card Reader and Magnetic Stripe Reader. This is leading new edge of fully functional touch monitor with various options to countless market sectors. 8615 gives new impressed image to user that is friendly MSR swipe angle. The 45 degree angle design is based on the user of humanized aptitude.
User’s Manual 8615 Touch Monitor CHAPTER 2 Appearance Touch Monitor SmartCard Reader LED Indicator: Standby or not LED Indicator: Power ON/OFF Magnetic Stripe Reader Power Button 3
User’s Manual 8615 Touch Monitor Power adapter VGA port Touch screen connected Touch screen connect cable MSR connected Smart Card Reader connected MSR & Smart Card Reader connect cable 4
User’s Manual 8615 Touch Monitor CHAPTER 3 OSD Setting There are four buttons on OSD panel: Menu / Enter, Right, Left and LCD ON/OFF. The functions of these four buttons are as follows Menu/Enter Button Press it to open OSD window and enter "User Mode" to do the function adjustment or selection of the item. It may have many levels in one item. As you select this kind of item, you will enter the next level and see the sub-items.
User’s Manual 8615 Touch Monitor OSD Menu Structure Main Menu If press the “ MENU” key, the screen will appear this main menu page, you can use the “UP” or “ADJ. +” and “Down” or “ADJ. –“ key ( Pic1 ) to select the function you need. PIC1 The end of this page will be shown the working resolution and frequency. A.Auto Adjust Press the Auto key. ( PIC2 ) In this function, it will be activated the auto adjusting for the picture.
User’s Manual 8615 Touch Monitor B..BRIGHTNESS If select BRIGHTNESS function on OSD MAIN MENU and press the MENU key. ( PIC3 ) You can press ADJ+ or ADJ- key to increase or decrease backlight current of the inverter. PIC3 C. CONTRAST If select CONTRAST function on OSD MAIN MENU and press the MENU key. ( PIC4 ) You can press ADJ+ or ADJ- key to increase or decrease video gain of the picture.
User’s Manual 8615 Touch Monitor D. COLOR TEMPERATURE If You select COLOR TEMPERTURE function on OSD MAIN MENU and press the MENU key. In this function, it will enter into the sub-page ( PIC5 ) to adjust the display color of the picture PIC5 E. Management If select DISPLAY ADJUST function on Management and press the MENU key. In this mode, it will enter into the sub-page ( PIC6 ) to adjust display’s function of the picture.
User’s Manual 8615 Touch Monitor E-1. H-Position In this function, it could adjust the picture in horizontal position. E-2. V-Position In this function, it could adjust the picture in vertical position. E-3. Sharpness In this function, it could adjust the sharpness of the picture.
User’s Manual 8615 Touch Monitor E-4. PHASE In this function, it could adjust the clock phase of the picture. E-5. CLOCK In this function, it could adjust the clock frequency of the picture.
User’s Manual 8615 Touch Monitor F. Tools If select OSD DISPLAY function on OSD MAIN MENU and press the MENU key. this function will enter into the sub-page to adjust the display’s function for OSD. F-1. OSD H-Pos In this function, it could adjust the horizontal position of OSD display. F-2. OSD V-Pos In this function, it could adjust the vertical position of OSD display.
User’s Manual 8615 Touch Monitor F-3. LANGUAGE In this mode, it could enter into the sub-page to select the language for display. F-4. OSD TIMER In this function, it could adjust the time of OSD display. Except “0” is always display. F-5. Reset In this function, it could reset all setting.
User’s Manual 8615 Touch Monitor CHAPTER 4 Driver Installation Touch Drivers Insert CD-ROM and select 8615 driver & manual folder.
User’s Manual 8615 Touch Monitor Select Fujitsu Touch driver folder.
User’s Manual 8615 Touch Monitor Select driver folder.
User’s Manual 8615 Touch Monitor Select Win2000_XP folder.
User’s Manual 8615 Touch Monitor Select driver folder.
User’s Manual 8615 Touch Monitor Select Fujitsu Touch driver folder.
User’s Manual 8615 Touch Monitor When the setup screen appears then to select next step.
User’s Manual 8615 Touch Monitor When the setup screen appears then to select next step.
User’s Manual 8615 Touch Monitor When the setup screen appears then to select next step.
User’s Manual 8615 Touch Monitor When the setup screen appears then to select next step.
User’s Manual 8615 Touch Monitor When the setup screen appears then to select “ YES”.
User’s Manual 8615 Touch Monitor When the setup window appears then to select the “Continue Anyway”.
User’s Manual 8615 Touch Monitor After installation, system will require to restart, please select " YES.
User’s Manual 8615 Touch Monitor When first time completes Touch installation, require to process the cursor accuracy calibration, to search for the Touchkit utility shortcut on the desktop and select Touchkit utility to setup.
User’s Manual 8615 Touch Monitor When configuration window appears, select the language which you use.
User’s Manual 8615 Touch Monitor Then to select calibration function and numbers of calibration point in advance. (above picture shows select by 25 numbers) Next to click on calibrate button.
User’s Manual 8615 Touch Monitor The screen will show as above picture, use the Touch pen to point on dot and align the cursor, if the actual alignment has too much difference then the system will skip back to previous screen and require calibration again.
User’s Manual 8615 Touch Monitor The numbers of the calibration point shows on the screen will depend on the number you have set before, after complete system will skip back to desktop (if the cursor still not accurate, please repeat the calibration again).
User’s Manual 8615 Touch Monitor SmartCard Reader Driver Point to " My computer" and press " Right Click". Please select " Properties.
User’s Manual 8615 Touch Monitor Select "Device Manager". Select the "Device Manager".
User’s Manual 8615 Touch Monitor Select "USB PC/SC SmartCard Reader" and right click to choose "Update Driver..
User’s Manual 8615 Touch Monitor When the setup screen appears then to select "Advanced" & "Next" step.
User’s Manual 8615 Touch Monitor Select "IMT5123 USB Driver" folder.
User’s Manual 8615 Touch Monitor When the next setup windows appears, please select the next step to continue the setup.
User’s Manual 8615 Touch Monitor When the next setup window appears, please select the next step to continue the setup.
User’s Manual 8615 Touch Monitor Above screen shows the installation process window.
User’s Manual 8615 Touch Monitor After installation completes, select “Finish”.
User’s Manual 8615 Touch Monitor MSR Driver Select "MSR USB Driver"Folder.
User’s Manual 8615 Touch Monitor Select "USB for Win SERIES"Folder.
User’s Manual 8615 Touch Monitor Select "PL-2303 Driver Installer"to start install.
User’s Manual 8615 Touch Monitor When the setup screen appears then to select next step.
User’s Manual 8615 Touch Monitor When the setup screen appears then to select finish .
User’s Manual 8615 Touch Monitor CHAPTER 5 Hardware Specifications Model 8615 LCD Display 15"TFT LCD Max Resolution XGA 1024 x 768 Pixel Pitch 0.297(H) x 0.297 (H)mm Brightness 250 cd/m2 (Typ) Contrast Ratio 500:1(Typ) Display Color 16.
User’s Manual 8615 Touch Monitor Appendix: AC ADAPTER Dimension: 108*65*31 mm Applications: TV, Electronical Product Features: .42W O/P,universal I/P, desktop design3 .Support Blue Angel - less than 0.75W @ no losd .OVP,OCP, and short circuit protection .OTP protection (optional) .Operating temperature range from 10 to 40'C .Operating relative humidity range form 10% to 90% (non-condensing) .MTBF 100KHRs @ 25 per MIL-HDBK-217F Specifications : .Input Voltage .Input Current .Input Frequency .
User’s Manual 8615 Touch Monitor MI-S v 47
User’s Manual 8615 Touch Monitor 1. SCOPE This specification describes a full range of AC input voltage with single output voltage switching power adapter. 2. ELECTRICAL SPECIFICATION 2.1. AC INPUT REQUIREMENTS 2.1.1. INPUT VOLTAGE The operating range of the power adapter is 90 to 264Vac. 2.1.2. INPUT FREQUENCY The input frequency range is 47 to 63 Hz. 2.1.3. EFFICIENCY The power adapter efficiency is 80% min. At full load and with 115Vac input. 2.1.4. INRUSH CURRENT No Damage (Cold Start ). 2.1.5.
User’s Manual 8615 Touch Monitor 2.2.2. OUTPUT CURRENT The minimum and maximum continuous output current are listed in this section. Output Voltage Minimum (A) Maximum (A) 12.0V 0.0 3.33 2.2.3. OVER CURRENT CONTROL Over current protection will prevent damages to power supply when output is short-circuited continuously with100 milliohms or less. The output current shall be internally limited to 150% Max or less at load condition .
User’s Manual 8615 Touch Monitor 2.2.7. VOLTAGE HOLD-UP TIME When the power supply is operated at 100% of maximum continuous output load, the minimum output holdup time after loss of input power shall be 8mS for AC input voltage (115Vac, 60Hz) and at 60-degrees cut angle. 3. MECHANICAL REQUIREMENTS 3.1. PHYSICAL DIMENSIONS The overall dimension of this switching power adapter is 108 mm (L) x 65 mm (W) x 31 mm (H) Max. 4. ENVIRONMENTAL REQUIREMENTS 4.1.
User’s Manual 8615 Touch Monitor 4.4. EMI 4.4.1. CONDUCTED EMI For 240 Vac input operation, the power adapter must below the CISPR 22, Class B limit for HF equipment and DP equipment with a 3 dB margin. For 120 Vac input operation, the power adapter must below the FCC part 15 sub–part B for Class B computing device with a 3 dB margin. For 100 Vac operation, the power adapter must below the VCCI limit by a 3 dB margin.
User’s Manual 8615 Touch Monitor Troubleshooting When encountering difficulties in using this product, please follow the steps or solutions.. If the problem persists, please contact the dealer. 1. No picture on screen a. Check the AC cord and signal cable. Make sure they are properly connected. b. Check that the power button on the OSD panel is turned on. c. Check if the computer has entered energy saving mode. 2. Abnormal display colour a. Check if the signal cable is properly connected to the computer.
