Customer Pole Display SERIES 8035 Operation Manual Version 1.
8035 Series User Manual This equipment has been tested and found to comply with the limits for Class A digital device. Pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses, and if not installed and used in accordance with the instructions may cause harmful interference will not occur in a particular installation.
8035 Series User Manual Table of Contents: Chapter 1 Introduction .............................................................................3 Chapter 2 Appearance ............................................................................4 Chapter 3 Before You Install.....................................................................5 Chapter 4 Installing Model 8035 4-1 RS-232 Interface.............................................................6 4-2 USB Interface................................
8035 Series Chapter 1 User Manual Introduction The 8035 multi language LCD customer display is an excellent tool for transmitting transactions, advertising message, and customer greeting at POS system(point-of-sale system). With adjustable tilt angles and visual swivel, customer could freely set just right angle and pole height according to their demand. The bright alphanumeric LCD display provides wide viewing angles, no matter in close or short distance.
8035 Series User Manual Chapter 2 Appearance LCD Display Cable Connector JD-8035 4
8035 Series Chapter 3 User Manual Before You Install This manual describes functions and usage of the Model 8035 customer pole display. The 8035 is a 2x20 alphanumeric customer pole display designed with multi-languages for retail and other industrial environments. Its outstanding features include high quality liquid crystal display in blue & white color,USB & serial interface are easy to use and powerful programming features. The 8035 can also combine with any serial receipt printer.
8035 Series User Manual Chapter 4 Installing Model 8035 This chapter describes the procedures for installing the 8035 pole display by RS-232 & USB interface. 4-1 .RS232 Interface. Step 1: Turn off your computer If you have not already done so, turn off your computer to avoid any accidental damage to the pole display and computer.
035 Series User Manual Step 3: Decide on power access The RS-232 connection requires power +12V DC. This may be provided through an internal connection in your computer or through an external connection to a 110/220V adapter. The components for an internal connection are provided. Step 4: Using internal power source Refer to the installation diagram as below. Remove the access cover to your computer. Mount the +12V DC power plate on an available expansion slot in the back of your computer.
8035 Series User Manual 4-2 USB Interface Step 1: Bulid up your 8035 JD-8035 Touch POS 8802 USB B USB A 8035 Customer Pole Display USB Installation Step 2: Connect to your computer Connect the USB connector to the usb port on your computer. Step 3: Refer to RS-232 configuration Please refer to RS-232 configuration step 3 and following steps. (USB 2.
8035 Series Chapter 5 User Manual Programming Commands There is a programming mode available for model 8035 with ESC/POS mode. In this Chapter, we will use ESC/POS mode for multi-languages, Please refer to Appendix for details. The basic function of the 8035 display is comparable to the display programming by your software should be as easy. You only need open the COM-port on which the display has been connected from you.
8035 Series User Manual Programming using DOS routines You can also generate a display output using the simple DOS routines. Example: MODE COMx: 9600, N, 8, 1 ECHO Hello! >COMx: Control characters and special functions For special display functions, there are some commands which will be explained in this chapter. Some of the commands consist of one ASCII-CTRL-code, others are command strings, introduced by ESC.
8035 Series Appendix I NO 1 2 3 4 5 6 7 8 9 10 User Manual Specifications Item Display method LCD type Backlight mode Brightness Display color Adjustable angle Viewing angle Numberof character Character size Character font Descriptions Liquid crystal display STN Blue mode LED backlight 600 cd/m2 Blue (back color) and White (character color) Swivels 360° and Tilt 45° Angles 0– 45 degrees 20 columns x 2 lines 5mm(w) x 10mm (H) , 5x7 dot 2 x 20 dot matrix by alpha numeric Japan / English 11 Language Europ
8035 Series User Manual Appendix II Character Generator ROM Map 1.
8035 Series User Manual 2.
8035 Series User Manual 3.
8035 Series User Manual 15
