Customer Pole Display SERIES 8035 Operation Manuanl Version 1.
This equipment has been tested and found to comply with the limits for Class A digital device. Pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in are side ntial installation. This equipment generates, uses, and if not installed and used in accordance with the instructions may cause harmful interference will not occur in a particular installation.
Table of Contents: Chapter 1 Introduction ........................................................4 Chapter 2 Appearance ........................................................5 Chapter 3 Before You Install................................................6 Chapter 4 Installing Model 8035 USB Interface..................................................7,8 Chapter 5 Programming Commands..............................9,10 Appendix I Specifications....................................................
Chapter 1 Introduction The 8035 LCD customer display is an excellent tool for transmitting transactions, advertising message, and customer greeting at POS system(point-of-sale system). With adjustable tilt angles and visual swivel, customer could freely set just right angel and pole height according to their demand. The bright alphanumeric LCD display provides wide viewing angles,no matter in close or short distance. 8035 LCD customer display support language (Europe/English).
Chapter 2 Appearance LCD Display Cable Connector JD-8035 5 `
Chapter 3 Before You Install This manual describes functions and usage of the Model 8035 customer pole display. The 8035 is a 2x20 alphanumeric customer pole display designed with multi-languages for retail and other industrial environments. Its outstanding features include high quality liquid crystal display in blue & white color,USB & serial interface are easy to use and powerful programming features. The 8035 can also combine with any serial receipt printer.
USB Interface Step 1: Installation USB Driver Select the driver for your system software and installed After installation complete select “OK” 7 `
Step 2: Bulid up your 8035 USB A USB B Step 3: Connect to your computer Connect the USB connector to the port on your computer. Then check device installed normally in device manager.
Chapter 5 Programming Commands There is a programming mode available for model 8035 with ESC/POS mode. In this Chapter, we will use ESC/POS mode for multi-languages, Please refer to Appendix for details. The basic function of the 8035 display is comparable to the display programming by your software should be as easy. You only need open the COM-port on which the display has been connected from you. Then, you just needs send the character what you want to display on 8035 directly via the COM port.
Programming using DOS routines You can also generate a display output using the simple DOS routines. Example: MODE COMx: 9600, N, 8, 1 ECHO Hello! >COMx: Control characters and special functions For special display functions, there are some commands which will be explained in this chapter. Some of the commands consist of one ASCII-CTRL-code, others are command strings, introduced by ESC. If a command needs additional parameters, please do not forget to use ASCII format for the parameter.
Appendix I Specifications NO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 Item Display method LCD type Backlight mode Brightness Display color Adjustable angle Viewing angle Number of character Character size Character font Language Interface Software Programming Power Requirement Total dimensions Optional Pole Height Approximate Weight Material Colors Operating temperature Operating Humidity Storage Temperature Storage Humidity Descriptions Liquid crystal display STN Blue mode LED backligh
Appendix II Character Generator ROM Map 12 `
