Cash Drawer Opener SERIES 8005USB Operation Manual Version 1.
This equipment has been tested and found to comply with the limits for Class A digital device. Pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and if not installed and used in accordance with the instructions may cause harmful interference will not occur in a particular installation.
8005U User Manual I. Instruction of 8005U USB Cash drawer opener 1. General description The 8005U USB cash drawer opener is designed to open 24V cash drawers by sending any character through USB interface. * Cash drawers with any other kind of Voltage could be harmful to this equipment. Glancetron is not responsible for such damages. 2. 8005U USB LED statuses Flash: normal operation ON ( RED LED): normal operation 3. 8005U USB pin out #2, #5: By Trigger #4: Default 24V 4.
f) After 3 seconds the LED will flash for normal operation. 6. 8005U USB Driver installations for Windows series OS 1). Download 8005U USB Driver ZIP files from driver CD title, or download ZIP file from our web site. and extract 8005U driver to your hard disk. 2). When you plug in 8005U USB, Windows operating system will detect new hardware for USB.
3). Follow indicated steps to give driver and finish the installation. System will shared a simulated COM port for the 8005U USB cash drawer. 4).
7. How to drive the cash drawers: Open the COM port with RS232 parameters: 9600, N, 8, 1 (Baud Rate:9600 , None Parity, 8 Bit data , 1 stop bit) Cash drawer 1 ( marked CD1): (A) Send any character to 8005U to open it (excepting [ESC] code); any characters means ASCII code from code 1 to code 255. Or refer to enclosed command set in the table. (B) Send the block to 8005U with [ESC]+ [ASCII codes] to drive it. The [ASCII codes] please refer to enclosed command set.
