Product Info

Quick Commands
Command
Action
Indication
Turn device on
Hold the + button for 2
seconds
Status Indicator lights up for 2 seconds.
After device is turned on,
If indicator lights flash slowly, device is unpaired and
ready to pair.
If indicator lights are off, device is already paired and
ready to be controlled via the app
Turn device off
Hold the + button for 5
seconds
Status Indicator lights up for 2 seconds
Change device
brightness
Press the
corresponding + or –
button to raise/lower
brightness
5 levels of brightness available on HW
Granular and higher brightness modes available via
app.
Check battery
level
Press the battery
charge button
Battery charge indicator shows:
4 lights: 100% battery
3 lights: < 75% battery
2 lights: < 50% battery
1 light: < 25% battery
Reset and
switch device
off
Use a pin to press the
reset button
Status Indicator light blinks 5 times quickly