Installation & Assembly

Repeat Step 1 to assemble the other 3 corners, completing

the bottom shelf. Press rmly on all side and horizontal

support beams to ensure they are properly installed in the

upright beams.

2. Assemble bottom

Repeat steps 1 and 2. We recommend adding the section at

notch 9 from the bottom of the post. Add the horizontal and

side support beams. Add shelf.

NOTE: It is recommend adding shelves to the bottom half

of the shelving rack for better support before beginning next

step.

4. Assemble 2nd shelf

Repeat steps 1 and 2. We recommend adding the section

at notch 8 from the top. Add the horizontal and side support

beams. Add shelf.

6. Assemble 3rd shelf

Add laminate shelf to the bottom of the frame.

3. Add 1st shelf

Insert top post (P2) into bottom post (P1) until

you hear a click.

NOTE: Posts may appear loose until completion

of Step 7.

5. Add top post

Use bottom post (P1) and attach horizontal support beam

(P3) across the front, and attach a side support beam (P4)

to the other side. Insert horizontal and side beams starting

at the top of the slots on the upright posts and pushing

down after engagement. This will give you support while

building your shelves up. You have now assembled one

corner.

1. Attach support beams to bottom

post