Installation & Assembly

Verify that all beams and tie channel supports are properly

assembled and rmly seated into the top and bottom post

slots.

10. Check all beams and tie channels

Using two people, move the rack shelving to its nal location.

11. Move shelving

Insert top post (P2) into bottom post (P1) until

you hear a click.

NOTE: Posts may appear loose until

completion of step 8.

7. Add top post

Repeat steps 1 and 2. We recommend adding a section at

notch 8 from the top of the post. Add the horizontal and side

support beams. Add tie channel support and shelf.

8. Assemble 4th shelf

Repeat steps 1 and 2. We recommend adding section at the

top of the post. Add the horizontal and side support beams.

Add tie channel support and shelf.

9. Assemble 5th shelf