Installation Instructions

Verify that all support beams (P2) and tie channel supports

(P3) are properly assembled and ﬁrmly seated into the top

and bottom post slots.

6. Check all beams and tie channels

Using two or more people, move the rack shelving to its ﬁnal

location.

8. Move shelving

Check that the rivets are held behind the smaller hole of the

support beam keyholes. Repeat steps 4 and 5 for each tie

channel support.

5. Check the rivets

Place the wire shelf (P1) on top of the tie channel supports (P3)

for each shelf.

7. Add wire shelves

Two or more racks of the same height and depth can be

connected by sharing the same (P4) welded-end frame

between them.

NOTE: Ensure there are at least two shelves per rack between

each set of (P4) welded-end frames.

9. Move shelving

Smaller

hole