Installation Sheet

8
9. Attach upper center supports
F1
M8 - 1.25 x 15 Socket-head
cap screw
F4
M8 - 1.25 Rectangular nut
F6
F6
F4
P2
F3
P5
P2
F1
F4
P5
Parallel Mounting
Perpendicular Mounting
F3
M8 - 1.25 x 75 Socket-head
cap screw
F4
M8 - 1.25 Rectangular nut
F6
Spacer
P4
P6
P6
P4
P4
P4
48"
48"
48"
Attach the upper center supports (P5) to the ceiling brackets
using one of the details in the gure depending on ceiling bracket
mounting.
Parallel Mounting
Attach supports using M8 - 1.25 x 15 Socket-head cap screws
(F1) (2) and M8 - 1.25 Rectangular nuts (F4) (2) on each upper
center support.
Perpendicular Mounting
Attach supports using M8 - 1.25 x 75 Socket-head cap screws
(F3), M8 - 1.25 Rectangular nuts (F4) and spacer (F6) (2) on each
upper center support. Verify that all of the upper supports are
properly spaced. They should be on a 48" pattern as shown in the
gure.
8. Attach upper corner supports
F1
M8 - 1.25 x 15 Socket-head
cap screw
P2
F4
F1
P3
F4
M8 - 1.25 Rectangular nut
48"
48"
Attach the upper corner support (P3) to the ceiling brackets using
M8 - 1.25 x 15 (F1) (4) and M8 - 1.25 Rectangular nuts (F4) (4).
Make sure they are positioned 48" end to end on one side and
96" end to end on the other side. See gure.