Owner's Manual

8
Repeat steps 1 and 2 to attach the center and bottom mounting
brackets (P8) to the back of the cabinet.
NOTE: Hand tighten the nuts attaching the center and bottom
brackets. These brackets will need to be adjusted to mount the
cabinet on the wall.
The Gladiator
®
GearRod accessory provides a hanging solution for heavy outdoor gear and other seasonal items, freeing up space
in your household closets for everyday items. It attaches to any of the adjustable shelves or to the top of the cabinet. The Gladiator
®
GearRod holds up to 100 lbs of seasonal clothing and outdoor gear wear.
To order accessories, call 1-866-342-4089 and ask for the accessory part number listed below or contact your authorized Gladiator
brand dealer. In Canada, call 1-800-807-6777.
2b. Attach Mounting Brackets
NOTE: The three nuts on the center and bottom mounting
brackets must be loose enough to allow the brackets to move in
the slots.
Close the cabinet doors. Determine cabinet mounting location
on GearWall
®
panels or GearTrack
®
channel. Using two or more
people, engage the top bracket (P8) into the slots by lifting up,
pushing toward the wall and lowering the bracket rims into the
slots, as shown. Make sure the top bracket is fully engaged in the
slots, as shown. Open the cabinet doors. From inside the cabinet,
grasp the bolts in the center bracket and adjust the bracket
until it aligns with the slot in the GearWall
®
panels or GearTrack
®
channels. Push the cabinet toward the wall and lower the center
mounting bracket into the slots. Make sure the center bracket
(P8) is fully engaged in the slot, as shown. Repeat for the bottom
bracket (P8). Using a 1/2" wrench, fully tighten the nuts attaching
the center and bottom brackets.
3. Mount the Cabinet to GearWall
®
Panels or GearTrack
®
Channel
A. Bracket rim B. Mounting bracket
fully engaged
A
B
ACCESSORIES
GearRod Accessory
Order Part # GAAC36GRDSS