Instructions / Assembly

3 HOMEDEPOT.COM/GLACIERBAY
Please contact 1-800-247-1087 for further assistance.
Warranty (continued)
Simply write to Glacier Bay Water Filtration Systems at the address below. Explain the defect and include proof of
purchase and you name, address and telephone number or you can also call us at 1-800-247-1087.
U.S.A Canada
Glacier Bay Water Filtration Systems Glacier Bay Water Filtration Systems
2455 Paces Ferry Road, N.W. 900-1 Concorde Gate
Atlanta, GA 30339-4024 Toronto, ON M3C 4H9
Pre-Installation
PRE
PREPRE
PRE-
--
-INSTALLATION IN
INSTALLATION ININSTALLATION IN
INSTALLATION INSPECTION
SPECTIONSPECTION
SPECTION
Thoroughly check the water filtration system for possible shipping damage and parts loss. Also inspect and note any
damage to the shipping carton. Remove and discard (or recycle) all packing materials. To avoid loss of small parts,
we suggest you keep the small parts in the parts bag until you are ready to use them.
INSTALLATION LOCATIO
INSTALLATION LOCATIOINSTALLATION LOCATIO
INSTALLATION LOCATION
NN
N
Install the water filtration system in the cold water supply tubing where accessible for filter changes. This could be
behind the refrigerator, the cabinet under sink, the basement etc.
SPECIFICATIONS
SPECIFICATIONSSPECIFICATIONS
SPECIFICATIONS
Supply Water Pressure Min.
Supply Water Pressure Min. Supply Water Pressure Min.
Supply Water Pressure Min. -
--
- Max.
Max.Max.
Max. 30 - 100 psi (207 - 689 kPa)
Supply Water Temperature Min.
Supply Water Temperature Min. Supply Water Temperature Min.
Supply Water Temperature Min. -
--
- Max.
Max.Max.
Max. 40 - 100 °F (4 - 38 °C)
Rated Service Flow
Rated Service FlowRated Service Flow
Rated Service Flow @ 60 psi (414 kPa)
@ 60 psi (414 kPa)@ 60 psi (414 kPa)
@ 60 psi (414 kPa) 0.5 gallons per minute (1.89 liters per minute)
Inlet
Inlet Inlet
Inlet -
--
- Outlet
OutletOutlet
Outlet 1/4 in. quick connect fittings
mounting
screws (2)
1/4 in. tubing
to refrigerator
OUTLET
INLET
1 in.
1/4 in. tubing
from cold
water supply
NOTE: Be sure to allow a minimum space of 1-1/2 in. under
the system for removing the filter cartridge to change it.