Use and Care Manual

3 HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for further assistance.
Measuring
tape
Saber saw
or Jig saw
Safety
goggles
Electric
drill
Phillips
screwdriver
Wrenches
Pencil
Silicone
sealant
Hacksaw
11 mm
drill bit
Pre-Installation
Assembled
AA BB CC
TOOLS REQUIRED
HARDWARE INCLUDED
NOTE: This sink is an undermount (below the counter) installation.
NOTE: Hardware not shown to actual size.
Part Description Quantity
AA Clip 8
BB Plastic Cap 8
CC Screw 8
PLANNING INSTALLATION
□ Before installation verify that the cabinet width is at least *21".
□ Compare all parts with the Hardware Included and
Package Contents lists in this manual.
□ Check the surface of the sink for any flaws or damage, including
dents, bends, bumps, or scuff marks. If any damage is noticed or
parts are missing, do not proceed with the installation.
*21"