Installation Guide

4
Installation
1
Installing the faucet assembly
□ Shut off the water supply. Remove the old
faucet.
□ Clean the mounting surface.
□ Place the faucet (A) through the mounting
holes in the sink.
□ Ensure the slot openings of the rubber spacer
(G) and metal spacer (H) face toward the rear
of the sink.
□ Secure the faucet (A) to the sink using the lock
nut (I) provided.
G
H
I
A
G
H
I
I
A
E
K
C
D
E
B
E
K
B
□ Remove the preassembled guide washers
(E), metal washers (D) and rubber washers
(C) from the hot and cold faucet handles (B
and K).
□ Loosen the screws on the guide washers (E)
until the ends of the screws are ush with the
face of the guide washers (E).
□ Insert the hot faucet handle (B) to the left of
the spout and cold faucet handle (K) to the
right of the spout.
□ Attach the faucet handles (B and K) under-
neath the sink using the rubber washers (C),
metal washers (D) and guide washers (E).
Securely tighten the screws on the guide
washers (E).
CAUTION: Always turn off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
2
Installing the faucet handles