Installation Guide

Making the water supply connections

Thread the nut (1) on the supply line onto the outlet of the

water supply valve (2) and tighten with a wrench. Do not

NOTE: The hot side inlet tube is indicated by a label. Avoid

twisting wires together or placing the wires close to each

Making the water supply connections

Thread the nut (1) on the supply line onto the outlet of the

water supply valve (2) and tighten with a wrench. Do not

NOTE: The hot side inlet tube is indicated by a label. Avoid

twisting wires together or placing the wires close to each

Making the water supply connections

Thread the nut (1) on the supply line onto the outlet of the

water supply valve (2) and tighten with a wrench. Do not

NOTE: The hot side inlet tube is indicated by a label. Avoid

twisting wires together or placing the wires close to each

Making the water supply connections

Thread the nut (1) on the supply line onto the outlet of the

water supply valve (2) and tighten with a wrench. Do not

NOTE: The hot side inlet tube is indicated by a label. Avoid

twisting wires together or placing the wires close to each

Checking for leaks and removing the quick connector

HOMEDEPOT.COM/GLACIERBAY

Undermount Installation (continued)

Please refer to steps 10 and 11 on page 10 & 11.

When ﬁnished, place the sink grid (G), cutting board (D),

basket (E), rolling grid (F) and strainer cover (H) into the sink.