Installation Guide

Making the water supply connections

Thread the nut (1) on the supply line onto the outlet of the

water supply valve (2) and tighten with a wrench. Do not

NOTE: The hot side inlet tube is indicated by a label. Avoid

twisting wires together or placing the wires close to each

HOMEDEPOT.COM/GLACIERBAY

Undermount Installation (continued)

the sink accessories to the sink before installing the

sink to the cabinet.

step 3.

Place the mounting clips (not included) as shown in the attched template and mark the centers of the clip on the countertop.

Installing the accessories to the sink

Attaching the mounting clips (not included)

Drill holes with diameter of 1.38in. on the counter top at the position of the exist holes on sink. Please refer to steps

3 to 8 on pages 8 to 10.

Under mount clips not included. If you are installing this sink as an

under mount, please contact a professional installer or contact us

at 1-855-HD-GLACIER to determine the type of clip needed.

NOTE:

Making the water supply connections

Thread the nut (1) on the supply line onto the outlet of the

water supply valve (2) and tighten with a wrench. Do not

NOTE: The hot side inlet tube is indicated by a label. Avoid

twisting wires together or placing the wires close to each

Making the water supply connections

Thread the nut (1) on the supply line onto the outlet of the

water supply valve (2) and tighten with a wrench. Do not

NOTE: The hot side inlet tube is indicated by a label. Avoid

twisting wires together or placing the wires close to each

Making the water supply connections

Thread the nut (1) on the supply line onto the outlet of the

water supply valve (2) and tighten with a wrench. Do not

NOTE: The hot side inlet tube is indicated by a label. Avoid

twisting wires together or placing the wires close to each