Installation Guide

ManualsBrandsGlacier Bay ManualsDrop-in Kitchen SinksProfessional 33 in. Drop-In Single Bowl 16 Gauge Stainless Steel Workstation Kitchen Sink with Spring Neck Faucet

Making the water supply connections

Thread the nut (1) on the supply line onto the outlet of the

water supply valve (2) and tighten with a wrench. Do not

NOTE: The hot side inlet tube is indicated by a label. Avoid

twisting wires together or placing the wires close to each

Making the water supply connections

Thread the nut (1) on the supply line onto the outlet of the

water supply valve (2) and tighten with a wrench. Do not

NOTE: The hot side inlet tube is indicated by a label. Avoid

twisting wires together or placing the wires close to each

Making the water supply connections

Thread the nut (1) on the supply line onto the outlet of the

water supply valve (2) and tighten with a wrench. Do not

NOTE: The hot side inlet tube is indicated by a label. Avoid

twisting wires together or placing the wires close to each

Making the water supply connections

Thread the nut (1) on the supply line onto the outlet of the

water supply valve (2) and tighten with a wrench. Do not

NOTE: The hot side inlet tube is indicated by a label. Avoid

twisting wires together or placing the wires close to each

Making the water supply connections

Thread the nut (1) on the supply line onto the outlet of the

water supply valve (2) and tighten with a wrench. Do not

NOTE: The hot side inlet tube is indicated by a label. Avoid

twisting wires together or placing the wires close to each

Making the water supply connections

Thread the nut (1) on the supply line onto the outlet of the

water supply valve (2) and tighten with a wrench. Do not

NOTE: The hot side inlet tube is indicated by a label. Avoid

twisting wires together or placing the wires close to each

Making the water supply connections

Thread the nut (1) on the supply line onto the outlet of the

water supply valve (2) and tighten with a wrench. Do not

NOTE: The hot side inlet tube is indicated by a label. Avoid

twisting wires together or placing the wires close to each

Making the water supply connections

Thread the nut (1) on the supply line onto the outlet of the

water supply valve (2) and tighten with a wrench. Do not

NOTE: The hot side inlet tube is indicated by a label. Avoid

twisting wires together or placing the wires close to each

Undermount Installation

HOMEDEPOT.COM/GLACIERBAY

When you choose undermount style installation, please do not pull out the installation rail shown in this illustration.

This will cause the sink to be damaged beyond repair.It is strongly recommended that you use a professional installer is you choose

the undermount installation.

WARNING

Under mount clips not included. If you are installing this sink as an

under mount, please contact a professional installer or contact us

at 1-855-HD-GLACIER to determine the type of clip needed.

NOTE: