Installation Guide

ManualsBrandsGlacier Bay ManualsBathTreyburn Robe Hook in Chrome

Determining the mounting

location

Installation

Determine the location where you wish to

install your accessory.

Place the mounting bracket (AA) at the

desired location and mark the installation

holes using a pencil.

Drilling the pilot hole

Safety Information

If installing into ceramic tile, before

attempting to drill through ceramic tile,

the following must be done:

Using a center punch, very lightly and

carefully tap the spot where you wish to

drill to break the shiny glass portion of

the tile.

Pre-drill a pilot hole with a small drill.

Phillips

screwdriver

Electric drill Pencil Claw

hammer

Installing the brackets in ceramic

tile

Drill 1/4 in. based on the pre-drill pilot hole.

Tap 1/4 in. solid wall anchors (DD) into the wall

with a hammer until ﬂush with the wall.

Align the mounting brackets (AA) with installed

solid wall anchors (DD) and secure with the

mounting screws (BB).

TOOLS REQUIRED HARDWARE INCLUDED

AA-Mounting bracket x1 BB-Mounting screw x2

CC-Set screw x1 DD-Solid wall anchor x2

Flathead

screwdriver

Item #000-000

Model #BZ441100CP

OMSID #305556516

USE AND CARE GUIDE

ROBE HOOK

HOMEDEPOT.COM/GLACIERBAY

Please contact 1-855-HD-GLACIER for further assistance.

Summary of content (4 pages)

PAGE 1
Item #000-000 Model #BZ441100CP USE AND CARE GUIDE OMSID #305556516 ROBE HOOK TOOLS REQUIRED Phillips screwdriver HARDWARE INCLUDED Flathead screwdriver Electric drill Pencil Claw hammer AA-Mounting bracket x1 BB-Mounting screw x2 CC-Set screw x1 DD-Solid wall anchor x2 Installation the mounting 1 Determining location Determine the location where you wish to install your accessory. Place the mounting bracket (AA) at the desired location and mark the installation holes using a pencil.
PAGE 2
Installation (continued) the bathroom 4 Installing accessory Position the bathroom accessory over the mounting bracket (AA) and attach using the set screw (CC). Tighten securely with flathead screwdriver. AA CC Care and Cleaning These bath accessories are designed for years of trouble-free performance. Keep them looking new by doing the following: Clean periodically with a soft cloth. Avoid abrasive cleaners, steel wool, and harsh chemicals as these will dull the finish and void your warranty.
PAGE 3
Núm. de artículo #000-000 Núm. de modelo #BZ441100CP GUÍA DE USO Y CUIDADO OMSID #305556516 PERCHA PARA BATA HERRAMIENTAS REQUERIDAS Destornillador Phillips Destornillador Plano Taladro elécrico SE INCLUYE LOS HARRAJES Lápiz AA-Soporte de montaje x1 BB-Tornillo de montaje x2 CC-Tornillo de presión x1 DD-Sujetador para pared maciza x2 Martillo de orejas Instalación 1 Elección del lugar de montaje 2 Taladre el agujero piloto Elija el lugar donde desea instalar el accesorio.
PAGE 4
Instalación (continuación) de accesorios para el cuarto 4 Instalación de baño Coloque el accesorio de cuarto de baño sobre el soporte de montaje (AA) y sujételo con el tornillo de presión (CC). Apriete el tornillo con la destornillador Plano. AA CC Cuidado y limpieza Estos accesorios del cuarto de baño están diseñados para muchos años de trabajo libre de problemas. Manténgalo como nuevo haciendo lo siguiente: Límpielo periódicamente con un paño suave.