Installation Guide

ManualsBrandsGlacier Bay ManualsPlumbing3-in-1 Stainless Steel Bar Sink Strainer

Item # 1001-966-392

Model # 7048-121SS

3 IN 1 BAR SINK STRAINER – INSTALLATION INSTRUCTIONS

1. Apply bead of plumber´s

putty to underside of

strainer ange and insert

into drain opening.

2. Place rubber washer, then

ber washer over strainer

threads and tighten lock

nut. Remove excess putty

with a damp cloth.

3. Place nut and washer over

drain pipe and attach to

strainer. Tighten (do not

overtighten) and check

for leaks.

4. Position strainer cup into

strainer. To adjust water

ow, move handle from

one side to the other.

5. Position stopper into strainer.

Push down to cover strainer

opening.

6. Position at grid into

strainer. Push down to

cover strainer opening.

Questions, problems, missing parts? Before returning to the store, call Glacier Bay Customer Service 8 a.m. -7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday

1-855-HD-GLACIER

HOMEDEPOT.COM/GLACIERBAY

1 2 3 4 5 6

Summary of content (2 pages)

PAGE 1
Item # 1001-966-392 Model # 7048-121SS 3 IN 1 BAR SINK STRAINER – INSTALLATION INSTRUCTIONS 1 2 1. Apply bead of plumber´s putty to underside of strainer flange and insert into drain opening. 3 4 2. Place rubber washer, then 3. P lace nut and washer over fiber washer over strainer drain pipe and attach to threads and tighten lock strainer. Tighten (do not nut. Remove excess putty overtighten) and check with a damp cloth. for leaks. 4. Position strainer cup into strainer.
PAGE 2
Articulo # 1001-966-392 Modelo # 7048-121SS 3 EN 1 COLADOR DE BARRA – INSTRUCCIONES DE INSTALACIÓN 1 2 1. Aplique un cordón de 2. Coloque la arandela de masilla para tuberías sobre boma y la arandela de el lado inferior del reborde fibra sobre las roscas del del colador y insértelo en la colador y ajuste la tuerca abertura del drenaje. de bloqueo. Si hay algún exesco de masilla retírelo con un paño húmedo. 3 4 5 6 3. D oloca la tueca y la arandela 4. Coloque el tapón colador 5.