#28 GLACIER BAY. ode ssa sirs USE AND CARE GUIDE WORK STATION BAR SINK Questions, problems, missing parts? Before resuming to the store, call Glacier Bay Customer Service 8 a.m. 7 p.m., EST, Monday Friday, 9 a.m. 6 p.m., EST, Saturday 1-855-HD-GLAGIER THANK YOU We appreciate the trust and confidence you have placed In Glacier Bay through the purchase of this sink. We strive to continually create quality products designed to enhance your home.
Under mount Installation. Care and Cleaning Maintenance Safety Information Before installing this sink, read this instruction manual carefully. | contains important information concerning the safe installation, operation, and maintenance of your sink. Rental this manual for future use. In the event of sale, transfer, or relocation, ensure this manual remains with the sink. LIMITED LIFETIME WARRANTY This limited Lifetime warranty Is extended to the original purchaser of this sink.
PLANNING INSTALLATION Compare all parts to the Hardware Included and Package Contents lists and verify that all parts are Included. Inspect all parts for damage. If there are missing parts or visible damage to the sink, do not Install and contact the Customer Service Team at 1-855-GLACIER. TOOLS REQUIRED Silicone sealant HARDWARE INCLUDED Under mount clip Drill and drill bit E=F— @® pumps screwdriver Hammer Please contact 1-855-HF-GLACIER for further assistance.
PACKAGE CONTENTS Pa prescription anti ascription ant A Template 1 | Strainer bowl 1 B Sink 1 J Gasket 1 Cc Bottom grid 1 K Double lip seal 1 D Cutting board 1 L Waste howl 1 E Faucet 1 M Flat gasket 1 F Soap dispenser 1 N Fitting 1 e Strainer basket 1 0 Sink cap Tor soa 1 H Screw slide guide 1
1 Preparing the installation location A O H necessary, remove the old sink and disconnect the water supply lines underneath the sink. OJ H your sink dogs not already have an existing installation location, place the template (4) on the sink installation location and trace the locations to cut out. [J Check inside the cabinet for any obstructions prior to cutting. [J Cut out the location for the sink. Q / \ inside Dimension | ‘Cutout Dimension Cutout Dimension ‘Outside Dimension 2 Installation the sink O Loc
3 installing the drain assembly [1 Place the gasket (J) on top of the other drain hole in the sink (B), followed by the strainer bow (1). [1 From underneath the sink (B), position the double lip seal (K) with grooves facing up on the drain holes, followed by the waste bowl {L}. [1 From the top of the drain gels, screw the screw (H) into the waste bowl (L). [1 Post ion the gasket (M) at the base of the waste bowl (L) and screw the fitting (N) to the base of the waste bowl (L).
[1 When the faucet Is working. Please keep the faucet vertically. not submerge the faucet in the sink when it is filled
6 Assemble the soap dispenser [ Disassemble soap dispenser (F). Nozzle & Head Tube B——— boy Fangs — © Rubber Washer Ong — Lockout Install dispenser base. m9 Flange Rubber Washer Le O-ring A [1 Install the bottle. : Bottle [OJ Fill the bottle with 17 oz. of soap. [J Inge rt the Nozzle & Head Into dispenser base from the top. Press the Nozzle & Head several times to make sure soap Is evenly distributed.
7 Assembly the cutting board [J The cutting board could be flush with counter top 20mm & 30mm thickness. —— Cutting board = Push-In Rubber Stoppers For 20mm counter top Wood block For 30mm courtier top [ I the counter top is 20mm, Please insert the eight Push-in Rubber Stoppers. Front view afire installation ~~ Back view after Installation J If the counter top is 30mm thick, then the wood block supplied should be used. Insert wood block into the per-drilled holes to make cutting board become 10mm higher .
[J Do not use abrasive cleaning creams or powders, concentrated caustic soda, formic clad, or anything highly corrosive. For more Information on removing difficult stains, contact Customer Service at 1-855-HF-GLACIER or visit your local Home Depot store. [1 Clean with a sponge or soft dish cloth and gentle sink soap. For stains that are difficult to remove, such as calcium deposits, use eraser sponges, vinegar-based cleaners, and lime removers.
#2 GLACIER BAY. Questions, problems, missing parts? Before returning to the store, call Glacier Bay Customer Service p.m., EST, Monday-Friday, 9 a.m. 6 p.m., EST, Saturday 1-855-HF-GLACIER Retain this manual for future use.
