Use and Care Manual
5
Installation (continued)
4
Securing the faucet assembly
□ Pull out the hose (Q) slowly to recommended position
DO NOT pull out the hose (Q) completely from the faucet (A).
where the quick connector (3) stay right out of the mounting shank (G).
Install the rubber washer (H), and metal washer (I) onto the threaded mounting shank (L).
□ Thread the fixing nut (J) onto the mounting
screwdriver. Do not overtighten.
shank (L). Lock it into position by tightening with the provided tool (O) and Philips
□
Recommended Position
3