Instructions / Assembly

8
Installation (continued)
Making the water supply
connections
□
outlet of the water supply valve and tighten with
a wrench. Do not overtighten.
Thread the nut on the supply hose (R) onto the
7
CAUTION: The hot and cold inlet tubes are indicated
by their colors: red means hot and blue means cold.
Avoid twisting wires together or placing the wires
close to each other and damaging.
Install the spray head
□ Install the spray head (T) onto the pull-out hose (Q).
□ Pull the hose assembly from the spout and check for smooth operation. Check the sprayer by pushing the button
to switch from stream to spray.
□ Remove the protective cap (4) on the end of pull-out hose (Q).
8
4