Instructions / Assembly

4
Installation
1
Preparing for installation
CAUTION: Always shut off the water supply before removing or replacing any part of a faucet. Open the
handle to relieve water pressure and ensure that the water is completely shut off.
□ Remove the weight (P).
Remove the protective clip (1) on outlet hose (S).
Unscrew the hose protector (K), screw nut (J), metal washer (I) and rubber washer (H).
□ Check that the pre-assembled supply hoses (R) and outlet hose (S) are tightened securely.
□
□
Push the tab (2) of outlet hose (S) upward and then pull
down the quick connector (3) of pull-out hose (Q) to disconnect them.
2
3
pull
down
push
upward
1
2
Assemble the faucet
□
shank (L).
Put pull-out hose (Q) through the mounting
3
Installing the faucet assembly
□ Insert the faucet assembly (A) through the hole.
□ Use the escutchen (M) and waterproof foam (N) if needed.
This step is for escutcheon installation as
an option for 3 hole application.
If the sink is uneven, use silicone under
the waterproof foam (N).
□
assembly (A).
screw the mounting shank (L) into the faucet