Use and Care Manual

6
Installation (continued)
5
Attaching the quick connector to the receiving block
□ Push the quick connector of pull-out hose (J) firmly upward and attach it to the receiving block of outlet hose (L).
Push until a “Click” is heard. Tug downward to test engagement.
□ Attach the protective clip on the outlet hose (L) for security.
Protective Clip
Making the water supply
connections
outlet of the water supply valve and tighten with
a wrench. Do not overtighten.
Thread the nut on the supply hose (K) onto the
6
CAUTION: The hot and cold inlet tubes are indicated
by their colors: red means hot and blue means cold.
Avoid twisting wires together or placing the wires
close to each other and damaging.