Instructions / Assembly

This step is for escutcheon installation as an option for
3 hole application.
If the sink is uneven, use silicone under the waterproof
foam (O).
4
Installation
1
Preparing for installation
2
Installing the faucet assembly
□ Insert the faucet assembly (A) through the hole.
□ Use the escutchen (N) and waterproof foam (O) if needed.
CAUTION: Always shut off the water supply before removing or replacing any part of a faucet. Open the
handle to relieve water pressure and ensure that the water is completely shut off.
□ Remove the weight (I).
Remove the protective clip (1) on outlet hose (L).
Unscrew the hose protector (F), screw nut (E), metal washer (D) and rubber washer (C).
□ Check that the pre-assembled supply hoses (K) and outlet hose (L) are tightened securely.
□
□
Push the tab (2) of outlet hose (L) upward and then pull
down the quick connector (3) of pull-out hose (J) to disconnect them.
2
3
pull
down
push
upward
1