n G LAC I E R BAX Model #4310F USE AND CARE GUIDE TOP MOUNT DOUBLE BOWL KITCHEN SINK Questions, problems, missing parts? Before returning to the store, call Glacier Bay Customer Service 8 a.m. 7 p.m., EST, Monday Friday, p.m., EST, Saturday 1-855-HD-GLAGIER THANK YoU We appreciable the trust and confidence you have placed in Glacier Bay through the purchase of this sink. We strive fo continually create quality products designed to enhance your home.
Top mount Installation.. . Care and Cleaning Pro-Installation. . Be fora installing this sink, read this instruction manual carefully. It contains important information conceding the saga installation, operation, and maintenance of your sink. Rental this manual for future use. In the event of sale, transfer, or relocation, ensure this manual remains with the sink. LIMITED LIFETIME WARRANTY This lilted Lifetime warranty Is extended to the original purchaser of this sink.
PLANNING INSTALLATION Compare all parts to the Hardware Included and Package Contents lists and verify that all parts are included. Inspect all parts for damage. If there are missing parts or visible damage to the sink, do not install and contact the Customer Service Team at 1-855-GLACIER. TOOLS REQUIRED Silicone Phillips sealant @ Safety goggles screwdriver Hammer Drill and drill bit HARDWARE INCLUDED Mounting clip BB | Colander feet 3 Please contact 1-855-HF-GLACIER for further assistance.
PACKAGE CONTENTS D pl quantity Pa scrip ate 1 Strainer bow! Gasket Double lip seal Cutting board Pasta howl Colander flabbergast ket Roll mat Fitting ket Towel Screw slid gulden
1 Preparing the installation location O I necessary, remove the old sink and disconnect the water supply lines underneath the sink. [ K your sink does not already have an existing installation location, place the template (A) on the sink installation location and farce the locations to cut out. [0 Check Inside the cabinet for any obstructions prior to cutting. [ Cut out the location for the sink. 2 Installation the sink [0 Insert the clips into the channels.
3 installing the drain assembly [ Place the gasket (J) on top of the other drain hole in the sink (B), followed by the strainer bows (1). [ From underneath the sink (B}, position the double lip seal (K) with grooves facing up on the drain heels, followed by the waste bowl (L). [ From the top of the drain hole, screw the screw (H} into the waste bowl (L). [ Position the gasket (M)at the base of the waste bowl (L} and screw the fitting (N) to the base of the waste bowl {L).
P GLACIER BAY. Questions, problems, missing parts? Before resuming to the store, call Glacier Bay Customer Service 8 a.m. 7 p.m., EST, Monday-Friday, 9 a.m. 6 p.m., EST, Saturday 1-855-HF-GLACIER Retain this manual for future use.
