Installation Guide
THANK YOU
We appreciate the trust and condence you have placed in Glacier Bay through the purchase of this showerhead.
We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of
products available for your home improvement needs. Thank you for choosing Glacier Bay!
Warranty
LIMITED LIFETIME WARRANTY
WHAT IS COVERED
The distributor warrants to the original consumer purchaser this product to be free from defects in material
and workmanship under normal use in residential applications. At its option, the Company will provide
repair parts or replace defective product, when the product is used in accordance with the manufacturer’s
specications. Use of abrasive or chemical cleaners may damage the nish of the product. We recommend
cleaning your product with a soft cloth, moistened with water. Damage resulting from the use of abrasive
or chemical cleaners SHALL VOID THIS WARRANTY.
WHAT IS NOT COVERED
This warranty is not applicable to any products or parts of products where damage is caused by use
of non-genuine parts; is due to installation error, product misuse, negligence or faulty maintenance;
or where the product is not installed according to local building codes.
This warranty excludes labor charges or damage incurred during installation, repair or replacement, and any
indirect, incidental or consequential damages, losses, injury or costs of any nature. This warranty is in lieu
of and excludes all other warranties, conditions and guarantees, whether expressed or implied, including
without restriction those of merchantability or tness of use.
Liability under this warranty will not exceed the purchase price for the product claimed to be defective
by the original consumer purchaser. Some states or provinces do not allow the exclusion or limitation of
consequential damages so the above limitations or exclusions may not apply. This warranty gives you
specic legal rights and you may also have other rights which vary from state to state, or province to
province.
Contact the Customer Service Team at 1-855-HD-GLACIER or visit www.HomeDepot.com/GlacierBay.
Questions, problems, missing parts? Before returning to the store,
call Glacier Bay Customer Service
8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday
1-855-HD-GLACIER
HOMEDEPOT.COM/GLACIERBAY
USE AND CARE GUIDE
SHOWERHEAD WITH ADJUSTABLE SHOWER ARM
Item #1005516792
Model #3075-512-WS1
Safety Information
Please read and understand this entire manual
before attempting to assemble, operate or
install the product.
WARNING: Protect your eyes with
safety glasses when cutting or soldering
water lines.
Care and Cleaning
Clean periodically with a soft cloth. Avoid abrasive cleaners, steel wool, and harsh chemicals as these
will dull the nish and void your warranty.
Pre-Installation
TOOLS REQUIRED (not included)
Adjustable wrench
PACKAGE CONTENTS
Part Description
A
B
A
Showerhead
B
Adjustable shower arm
HARDWARE INCLUDED
Part Description Quantity
AA
BB
CC
AA Gasket 2
BB Thread seal tape 1
CC Allen wrench 1
Before beginning assembly of product, make sure all parts are present. Compare parts with package
and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
Contact customer service for replacement parts.
Estimated Assembly Time: 30 minutes
Installation may vary depending on how the previous showerhead was installed. Supplies necessary for
the installation of the showerhead are not all included; however, they are available wherever plumbing
supplies are sold.
Prior to beginning installation, turn off the hot and cold water lines, then turn on the shower to release
built-up pressure. When installing the new showerhead, hand tighten the connector nuts. Wrap all
threaded connections with thread seal tape. Always wrap in a clockwise direction.
Installation
1
Removing the existing showerhead
2
Preparing pipe ends
Remove the existing showerhead (1.1) from
the wall shower arm (1.2).
Clean and dry the threads on the shower arm.
Apply thread seal tape (BB) onto the threads
of the wall shower arm (2.1) in a clockwise
direction. Do not overwrap.
1.2
1.1
BB
2.1
Installation (continued)
3
Installing the shower arm
4
Installing the showerhead
Insert a gasket (AA) between the end of the
adjustable shower arm (B) and the wall
shower arm (3.1).
Turn the mounting nut (3.2) on the adjustable
shower arm (B) clockwise to tighten, but do
not overtighten.
Once installed, tighten the set screw (3.3) on the
mounting nut (3.3) using the Allen wrench (CC).
Insert a gasket (AA) between the
showerhead (A) and the adjustable shower
arm (B). Hand tighten the showerhead (A),
but do not overtighten.
Turn on the water and check for leaks. If leaks
occur, retighten connections or reinstall using
more thread seal tape (BB).
AA
3.1
3.2
B
CC
3.3
AA
A
B
Troubleshooting
PROBLEM POSSIBLE CAUSE SOLUTION
There is low water
pressure or a
missing spray
pattern.
The showerhead spray nozzles are
clogged.
Soak the showerhead in a solution of water and vinegar.
Use a solution of 50% white vinegar and 50% water over-
night. The vinegar will break down any mineral deposits
or sediment from hard water and should improve the ow
through your showerhead.
Debris has clogged the shower arm
or showerhead.
Remove the showerhead and rinse debris from internal
parts.
Turn on the hot and cold water and let it run for at least
30 seconds to ush debris from the lines.
Reinstall the showerhead.
The shower arm/
showerhead
connection is
leaking.
Showerhead connection is loose. Gently and rmly tighten the showerhead, but do not
overtighten.
There is leaking
at the connection
between the
adjustable shower
arm and wall
shower arm.
Shower arm connection is loose or
thread seal tape is not creating a
good seal.
Retighten the adjustable shower arm to the wall shower
arm.
If the leak continues, remove the adjustable shower arm
from the wall shower arm to conrm thread seal tape was
applied properly. Remove and reapply thread seal tape,
if needed.
Notes