Installation Guide

6
Installation (continued)
3
Connecting the front and rear tubes
to the legs
□ Fasten a front tube (C) and a rear tube (D) to each leg
assembly.
4
Attaching the shelves to the leg
assembly
NOTE: The crosswires should be on the bottom of the
shelf.
□ Fasten two shelves (B) to the rear tubes (D) using the large
screws (AA).
□ Fasten shelves (B) to the front tubes (C) using the medium
screws (BB).
C
back of legs assembly
BB
AA
D
NOTE: Be sure to orient the front tube (C) so that the end
with the “dimpled” hole is on the top.
back of legs
assembly
B
B
C
C
D