Installation Guide

Installation

WARNING: Injury may occur if you do not install the top

of the assembly onto the ceiling rst.

□ Slip the tapered end of the short tapered tube (D) into the

untapered end of the bottom tube of the assembly.

□ Place the soft vinyl end cap (CC) on the short tapered

tube (D).

□ Lift the entire assembly into position over the shower stall.

□ Compress the top of the unit against the ceiling at the

desired location.

□ Move the bottom end into place on the shower oor so that

the unit is in a vertical position.

Preparing assembly for installation

□ Place the tape strips (DD) around the seams of the tubes.

bottom shelf assembly

Installation (continued)