Installation Guide

5 HOMEDEPOT.COM

Please contact 1-855-HD-GLACIER for further assistance.

Installation (continued)

Connecting the shelves to the tube

NOTE: Assembly shown for a 92 - 97 in. installation.

NOTE: The tapered end of the long tube (C) should be at

the top.

NOTE: Shelves (E,F and G) can be adjusted by loosening

the pre-attached set screw and moving the shelf up or

down.

□ Slide the shelf with towel bar (G) down one of the long

tapered tubes (C) and tighten the pre-attached set screw.

□ Slide the shelf with hooks (F) down one of the long tapered

tubes (C) and tighten the pre-attached set screw.

□ Repeat this process for the other long tapered tube (C) and

the other shelves (E).

Measure distance to ceiling

NOTE: No matter the distance, tubes (A) and (B) are

ALWAYS used.

□ Measure the distance between the tub ledge or the shower

stall oor to the ceiling to the nearest inch.

□ Refer to the Troubleshooting section at the end of this

manual to know what tubes (C) and (D) that are needed.

tapered end

pre-installed set screws

tub ledge

shower stall oor