Product Specs

TM20-B/QQ

GL solutions Inc. JAPAN

Handling precautions

When using the Reader/Writer and a card, please note the precautions shown below. Make sure to follow them

since misuse may cause an abnormal operation, leading to a product failure.

Please note that we shall not be held liable for any incidental damage that occurs to the recorded contents of the

Reader/Writer due to its failure, malfunction or defect.

Before use

Please describe the follon items in the Instruction Manual or Delivery Speciﬁcation, etc., for the deviCe with this

Reader/Writer built in:

1) This device includes the communication equipment which uses a radio ﬁequency of 13.56. MHz, 3 generally

available ISM bandwidth. Therefore, interference may occur depending on the use application or place. In

order to reduce the effect due to this interference, it is requested to mutually perform an advanced check

before introducing this device.

Please pay special attention to use in such an environment since it may affect radio astronomy or a medical

device.

2) Persons with an implanted medical device should keep the device’s ﬁtting portion more than 22 cm away

ﬁ'om the antenna portion of the RFID equipmmt.

Mounting on enclosure

When mounting a substrate on the enclosure, please follow the dimensions shown below.

Metal is available only in the shaded area around the mounting hole.

(Using a metal screw may shorten the access distance to a card. Therefore, use a metal screw aﬂer veriﬁcation.)

Square mounting hole

Model speciﬁcations

This Reader/Writer is speciﬁed regarding the model of the guided read/write communication equipment.

Accordingly, please describe as such in the Instruction Manual or Delivery Speciﬁcation, etc., for the device

with this Reader/Writer built in. The model speciﬁed number is indicated by a seal on the shielding case of this

Reader/Writer.

JAISA indication

Aﬂix a JAlSA (Japan Automatic Identiﬁcation Systems Association) indication sticker to a

location RFI D which is clearly identiﬁed from the exterior portion of the equipment body

including this Reader/Writer in order to demonstrate the product for persons ﬁtted with an

implanted medical device.

6.0