Manualshelf

User Manual

ManualsBrandsGL.iNet ManualsComputers & AccessoriesGL-S1300 (Convexa-S) Home AC Gigabit VPN Router, 400Mbps(2.4G)+867Mbps(5G) High Speed, DDR3L 512MB Flash ROM, 8GB EMMC, OpenWrt Pre-Installed, Wi-Fi Networking
141142143144145146147148149150
Page 142 | 150
10.7. Access Web Panel
Sometimes you may be unable to access 192.168.8.1 to login web admin panel, please
follow the guide below to solve this problem.
Check connection/router's IP address
Make sure your WAN/LAN port connection is correct. WAN port is connected to an
internet source and LAN port is connected to devices. If connected by wifi, make sure the
SSID is correct.
Then follow the steps below to check the router's IP address.
Windows 7 / Windows 10
Your ip address results determine the next step.
Your IP address is incorrect
If the IP address is incorrect, check your connection again.
1. Try Reset to back to factory default.
2. If the reset doesn't work, you can try Debrick via uboot.
Your IP address is correct
1. Make sure you are using Chrome/Firefox, then try to access 192.168.8.1 again.
2. In order to avoid problems caused by the cache, click ctrl+shift+n in Chrome to
enter the incognito mode. Then try to access 192.168.8.1 again.