User Manual

Page 134 | 150

You can also refer to our video, How to Recover GL.iNet Mini Router by U-Boot

FailSafe.

1. First you have to download firmware to your computer. You can download the

firmware here. For GL-AR300M, GL-AR300M-Ext, GL-AR750S-Ext, please

download the .img firmware file. For GL-B1300, GL-S1300, please download the

.img firmware. Everyone else, download the .bin firmware file.

2. Connect your computer to the Ethernet port (either LAN or WAN) of the router.

You MUST leave the other port unconnected.

3. Press and hold the Reset button firmly first, and then power on your device. (If your

device does not have a power button, plugging it in will power it on automatically.)

If you can not find the reset button, please refer to our page, How to Repair and

Reset.

Release your finger when you see the LED has flashed:

4. The Power LED will light up. Then, other LEDs will start flashing.

• 4 times for GL-S1300, GL-B1300.

The leftmost LED may stay on the whole time while the rightmost LED flashes

4 times, then the middle LED turns on and stays on.

(Power and WAN LEDs will stay on the whole time.)

6. Set your computer’s IP address to 192.168.1.2. Please check the step-by-step guide

for different operating systems below:

Windows 7 / Windows 10Mac