Manualshelf

User Manual

ManualsBrandsGL.iNet ManualsComputers & AccessoriesGL-S1300 (Convexa-S) Home AC Gigabit VPN Router, 400Mbps(2.4G)+867Mbps(5G) High Speed, DDR3L 512MB Flash ROM, 8GB EMMC, OpenWrt Pre-Installed, Wi-Fi Networking
131132133134135136137138139140
Page 133 | 150
10.2. Repair or Reset
How to Repair / Reset
All GL.iNet Routers have reset buttons, you can use them to repair your network or reset
your routers to factory defult. If you can neither access the web-based setup page nor the
router, you can press the reset button:
Repair
Press and hold for 4 seconds then release to repair your network.
Reset
Press and hold for 10 seconds then release to reset the router to factory settings. All user
data will be cleared.
Reset Button
GL-S1300 Home AC Router
10.3. Debrick via Uboot
Using Uboot to Debrick Your Router
You may have bricked your router if you were doing some DIY projects or flashed a
wrong firmware. You may not be able to access your router but you can re-install the
firmware by using Uboot failsafe.
Please follow the procedures below to access the Uboot Web UI and re-install the
firmware.