User Manual

Page 100 | 150
Testing the Site to Site connection
Now the Site to Site network is created and started, let's test the connection.
Use your PC or Phone to connect to one of the Node of this Site to Site, and use browser
to access another Node's LAN ip, if you see the login page, the connection between these
two nodes is worked.
For example, my PC connect to Node 1 device, and then I use browser to access Main
Node's LAN IP (192.168.48.1), if I see the login page, it means the connection between
Node1 and Main Node is worked.
Route and other options
You can change each device's LAN IP and routes.
By default, each node can access other's LAN, based on security, we recommend only
open the corresponding service IPs.
E.g. There is a Server A(172.30.97.100) in Node 1's subnet, if you want other Site to Site
nodes only can access Node 1's Service A, you can set it like below: