User's Manual

SUPPORT
Technical Supports
For more detailed and updated instructions, please visit our website docs.gl-inet.com
For further questions, you can get help from the following ways:
- Email to support@gl-inet.com
- Message us on our Facebook: facebook.com/gl.inet.wifi/
- Post questions in our forum: forum.gl-inet.com
- Ask professionals in other forums e.g. OpenWrt, LEDE or other professional websites
https://docs.gl-inet.com/en/3/
Repair / Reset
If you cannot access the web-based setup page or cannot connect to the
router, you can press the Reset button:
Press and hold for 3 seconds, and then release to repair your network.
Press and hold for 10 seconds, and then release to reset the router
to factory settings. All user data will be cleared.
WARRANTY
We provide one year limited warranty for routers and 3-month limited warranty for accessories.
Extra warranty may apply according to the local law in which the product purchase took place.
Highly recommend using the included 5V/2A power adapter.
Any damage to the router caused by not following the instructions will render this warranty null
and void.
Any damage to the router caused by modifying the PCBA, components or case will render this
warranty null and void.
Issues caused by the use of third-party firmware may not get official support from us.
Any damage to the router caused by inappropriate use, e.g. inappropriate voltage input, high
temperature, dropping in the water or on the ground will render this warranty null and void.
Pictures on the instructions are only for reference. We reserve the right to change or modify
these materials without further notice.
GL Technologies (Hong Kong) Limited
Unit 203, 2/F, Building 19W, 19 Science Park
West Avenue, Hong Kong Science Park,
Pak Shek Kok, N.T., Hong Kong
Hong Kong Office
Shenzhen Guanglianzhitong Tech Co., Ltd.
Room 305 - 306, Skyworth Digital Building, Shiyan Street,
Baoan District, Shenzhen, China, 518000
( +86-0755-86606126 )
Shenzhen Office
FCC ID: 2AFIW-MIFIC4-EXT
Battery
3G/4G
Wi-Fi
Power port
WAN Ethernet port
LAN Ethernet port
USB2.0 port
Power button
SIM card slot
TF card slot
Reset button
LAN
WAN
Power
The Equipment named above is confirmed to comply with the requirements setout in the European Council Directive on the Approximation of the
Laws of the Member States relating to RED (2014/53/EU). The equipment passed the test which was performed according to the following
European standards:
EN 301 489-1 V2.2.3 (2019-11); EN 301 489-17 V3.2.3 (2020-07);
EN 301 489-52 V1.1.0 (2016-11)
EN 55032:2015; EN 55035:2017; EN 300 328 V2.2.2 (2019-07);
EN 301 908-1 V13.1.1 (2019-11); EN 301 908-2 V13.1.1 (2020-06);
EN 301 908-13 V13.1.1 (2019-11); EN 62311:2020
EN62368-1:2014+A11:2017
ver. 20220824
This product uses WiFi 2.4GHz Operating Frequency is 2400~2483.5MHz;
The Product comply with Directive 2011/65/EU and its amendment directive 2015/863/EU (Rohs2.0)
FCC Radiation Exposure Statement:
This device meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by
independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety
margin designed to assure the safety of all persons regardless of age or health. The SAR limit of USA (FCC) is 1.6 W/kg averaged. Device types:
4G Smart Router (FCC ID: 2AFIW-MIFIC4-EXT) has also been tested against this SAR limit. SAR information on this and other pad can be viewed
on‐line at http://www.fcc.gov/oet/ea/fccid/. Please use the device FCC ID number for search. This device was tested simulation typical 10mm to
body. To maintain compliance with FCC RF exposure requirements, use accessories should maintain a separation distance between the user's
bodies mentioned above, use accessories should not contain metallic components in its assembly, the use of accessories that do not satisfy
these requirements may not comply with FCC RF exposure requirements, and should be avoided.
顏色潘通 (Color PANTONE) :产品名称(Product name)
物料编码
尺寸 (Size)
印刷(Print)
材质(Material)
备注(Remarks)
MIFI保修卡 (MIFI warranty card)
94*140mm
双面/彩色 (Double / Color)
200g铜版纸 (200g coated paper)
单卡 / 四个角做5mm圆角
版本日期 (Last updated): 2022/08/24
C10 M0 Y0 K70
C62 M0 Y87 K0