User's Manual

5.4 All Tag Users

The tag has no user controls.

Test your tag as recommended by your site management but not

less than twice per day – see tag test below.

It is preferably to wear your tag in a way where it can be visibly

seen by others.

Test your tag if you have any reason to think that it may have

been damaged - dropped, exposed to extreme temperature or

otherwise physically damaged.

Carry your tag at all times – it can be xed to your helmet, on a

lanyard, or arm pouch.

If you enter an exclusion zone the tag will vibrate twice and the

operator of the machine will be warned of your presence.

STOP,LOOK,LISTEN.

Identify the machine (remembering it maybe behind you) and move away

from it.

An alarm on the machine may also sound.

Note: your tag may not vibrate if you re-enter the exclusion zone of

the same machine within a short time. However, the operator will be

warned and the alarms will sound.

5.5 Drivers

Once registered your tag will not be detected by the machine you are

operating. It can still be detected by other machines.

You are always protected.

If you exit your machine, shut the machine down.

If you do not shut the machine down your tag will set off the alarm

when you re-enter the exclusion zone.