User's Manual

4 SystemsttedwithaStandardDisplay

! Warning

Tag present

Low tag battery

New tag present

System on

Acknowledege

4.1 If a single tag enters

the exclusion zone

The in cab display will ash

the “!”LED, the

“NewTag”LED, and

Beep once every second.

If an external alarm

Sounder/Beacon is

connected to the Base

Station both the alarm will

sound and the beacon will

ash.

This will repeat until the

operator presses the

“Acknowledge” button.

Once acknowledged the alarms will silence and the beacon will stop ashing,

but the “!”LED will continue to ash until the tag leaves the zone.

4.2 If more than one tag enters the exclusion zone

The “!”LED, the “NewTag”LED and Beep will indicate the number of

tags that have entered the eld

2 Tags detected = 2 ashes and 2 Beeps

4 Tags detected = 4 ashes and 4 beeps

10 Tags detected = 10 ashes and 10 beeps

To acknowledge more than one tag, the “Acknowledge” button must be

pressed for each tag. A one-second pause is required between each press of

the “Acknowledge” button.

4.3 Warning:

10 Beeps, the “NewTag” and “!”LED ashing indicates that the system

has failed to detect a drivers tag.