Installation Guide

6
nstallation: before drilling, please use electronic
detector to confirm whether there is power line
communication cable or water pipe in the wall.If
you use an electric drill, remember two points:
Please wear protective goggles.
Turn off the power after using the device.
Installation of fixed base: first determine the
installation hole and mark;Use a special
drill to Pierce the ceramic tile to prevent the
ceramic tile from breaking. Hammer drill to
drill the fixed hole of expansion adhesive
and punch in the expansion adhesive.Fix
the base on the wall with self-tapping
screws, and use a screwdriver to tighten
the self-tapping screws so that the base
does not fall off.
According to the size of the object to
determine the location of the installation
hole, mark, with a special method to install
the fixed base on the wall.Then insert the
lifting rod into the fixed base, and tighten the
top wire with an inner hexagon wrench to
prevent the lifting rod from falling off.
Three functions with side spray water dark flower shower set
Note: All dimensioning or dimensioning instructions in this manual are in "inches"
The hot water into the
Cold water into the
Carrying
out of the
water
The side
spray
showers
Flowers with water
Shower rod