Installation Guide
3
IMPORTANT!
Shut off main water supply prior to installation!
1. Shut off water supply line. If you do not have shut-off valve near the toilet shut
off main water supply line.
2. Flush the old toilet and make sure that tank is empty.
3. Disconnect and remove water supply line connected to the toilet's tank.
4. Remove old toilet, bolts, nuts from the closet flange.
5. Clean closet flange area from old wax ring and putty sealant using putty knife
from the base area.
6. Clean any remaining debris and wipe any water at the installation area
7. Temporarily plug flange on a floor with a flange plug or towel to prevent gasses
from escaping.
REMOVE OLD TOILET