Installation Guide

10
If the rod is too short, please re-adjust it (outward rotation).
If the rod is too long please cut-off the extra length and re-adjust it.
TROUBLESHOOTING
Use soft sponges or soft-cloths to clean the surface. Always rinse thoroughly any
cleaning solutions immediately after cleaning. Do not any chemical remain on the
surface for extended periods of time.
IMPORTANT!
DO NOT USE: Abrasive cleaners such as: acid, ammonia, bleach, and simmilar
solutions. Use of such solutions may cause corrosion, finish peeling, and/or dull
the surface.
DO NOT USE: Abrasive sponges or cloth. Never use steel, wool, or wired brushes
that will permanently scratch the surface.
Do not pour any mounts of chlorine or any other chemicals into the tank.
Use of chemical products will result in damage to the fill valve and flush valve
components and may cause flood and property damage
Note: fill and flush valves are maintenance free. No maintenance is required.
Retain these installation instructions for future reference!
MAINTENANCE & CARE
FILL/FLUSH VALVES MAINTENANCE & CARE