User's Manual

Given Imaging Ltd.
8 DOC-0062-02
TesTag
The TesTag is a plastic rod of 20 cm length. At one end it is equipped with an RFID
tag similar to the one in the M2A Patency Capsules, at the other end a suction cap is
attached.
The TesTag is used to verify the detection range of the Patency Scanner in a given
environment.
Caution
!
Operating the Patency Scanner in the proximity of the following items might
reduce the Scanner’s range:
• Operating monitors—Use the Scanner at least 5 meters away
from any operating monitors (Monitors in adjacent rooms should be
turned off.).
• Large metallic objects—Use the Scanner at least 30 cm away
from large metallic objects.
• Electronic or magnetic cards/badges and remote controls—
Remove and put aside, at least 1 meter away, any electronic or
magnetic cards/badges and remote controls which may contain
RFID tags.
The TesTag tests the interference of the above within a given environmment, and
thus enables to select and validate the proper working environment for the M2A
Patency Scanner.
A TesTag is supplied with each 10-Pak of M2A Patency Capsules.