User Manual
Table Of Contents
- Book 1: Setup & Maintenance
- Table of Contents
- Chapter 1
- Introduction
- Chapter 2
- Setting Up the System
- Setup Requirements
- Given Workstation
- DataRecorder and Cradle
- Storage Space for the PillCam Capsule Box
- Main Platform Components
- Connecting the Components
- Connecting the Given Workstation
- 1. Connect the Mouse cable to the Mouse connector.
- 2. Connect the Keyboard cable to the Keyboard connector.
- 3. Connect the monitor to the Workstation.
- 4. Connect the printer to the LPT connector or to the USB connector, depending on the printer’s connection cable.
- 5. If the Workstation’s voltage setting is manual, verify that the Workstation’s voltage matches the local voltage. If it does not, call Given Customer Support.
- 6. After voltage verification, connect the power cable of the Given Workstation to the electric outlet.
- 7. Connect the power cable of the monitor to the wall electric outlet.
- Connecting the DataRecorder Cradle
- Chapter 3
- Software Installation
- Chapter 4
- Multi-User Setup
- Chapter 5
- Technical Description
- System Labeling
- Essential Performance
- Warnings
- Cautions
- System Specifications
- PillCam SB Capsule
- PillCam SB 2 Capsule
- PillCam ESO 2 Capsule
- PillCam ESO 3 Capsule
- PillCam COLON 2 Capsule
- SensorArray DataRecorder 2
- SensorArray DataRecorder 3
- SB SensorBelt for DataRecorder 2 and DataRecorder 3
- DataRecorder 2 /2C
- Cradle DataRecorder 2
- DataRecorder 3
- Cradle DataRecorder 3
- DC Power Supply
- DataRecorder 3 Memory Card
- RAPID Software
- Guidance and Manufacturer's Declarations
- Chapter 6
- Maintenance
- Chapter 7
- Troubleshooting
Introduction
Chapter 1 3
Handling the PillCam Video Capsule
Each PillCam video capsule comes in its own box that enables the handling of the capsule until
ingestion. A magnet close to the capsule in the box keeps it inactive until removal from the box.
The capsule is active immediately after removal from the box.
To ensure the capsule remains inactive, it must be in the box. PillCam video capsules are packed
at Given Imaging Ltd. in a controlled process, ensuring the capsule is only activated after
removal from its box.
Caution
!
• Removal of a PillCam video capsule from its box activates it.
• Keep in the box until use.
• Store the capsules only in packaging supplied with the product.
• Do not use a PillCam video capsule if packaging is damaged.
DataRecorders
The DataRecorder is a compact battery-operated unit worn by the patient during the
examination. It receives and stores the image data transmitted by the PillCam capsule. There are
two models currently available: DataRecorder 2 and DataRecorder 3.
DataRecorder 2
The DataRecorder 2 consists of a receiver, a processor module, and a memory device for storing
the data transmitted by the PillCam video capsule.
The standard DataRecorder 2 Kit includes the following items:
• DataRecorder 2
• Standard RecorderBelt
• Two RecorderBelt extensions
• Pouch + suspenders
• Li-Ion battery pack
• DataRecorder 2 Cradle and adaptor
• 8-lead and 3-lead SensorArray
• DataRecorder 2 Carrying case