User Manual
Table Of Contents
- Book 1: Setup & Maintenance
- Table of Contents
- Chapter 1
- Introduction
- Chapter 2
- Setting Up the System
- Setup Requirements
- Given Workstation
- DataRecorder and Cradle
- Storage Space for the PillCam Capsule Box
- Main Platform Components
- Connecting the Components
- Connecting the Given Workstation
- 1. Connect the Mouse cable to the Mouse connector.
- 2. Connect the Keyboard cable to the Keyboard connector.
- 3. Connect the monitor to the Workstation.
- 4. Connect the printer to the LPT connector or to the USB connector, depending on the printer’s connection cable.
- 5. If the Workstation’s voltage setting is manual, verify that the Workstation’s voltage matches the local voltage. If it does not, call Given Customer Support.
- 6. After voltage verification, connect the power cable of the Given Workstation to the electric outlet.
- 7. Connect the power cable of the monitor to the wall electric outlet.
- Connecting the DataRecorder Cradle
- Chapter 3
- Software Installation
- Chapter 4
- Multi-User Setup
- Chapter 5
- Technical Description
- System Labeling
- Essential Performance
- Warnings
- Cautions
- System Specifications
- PillCam SB Capsule
- PillCam SB 2 Capsule
- PillCam ESO 2 Capsule
- PillCam ESO 3 Capsule
- PillCam COLON 2 Capsule
- SensorArray DataRecorder 2
- SensorArray DataRecorder 3
- SB SensorBelt for DataRecorder 2 and DataRecorder 3
- DataRecorder 2 /2C
- Cradle DataRecorder 2
- DataRecorder 3
- Cradle DataRecorder 3
- DC Power Supply
- DataRecorder 3 Memory Card
- RAPID Software
- Guidance and Manufacturer's Declarations
- Chapter 6
- Maintenance
- Chapter 7
- Troubleshooting
74
PillCam SB 2 Capsule .......................... 40
PillCam SB Capsule ............................. 39
Printer
Troubleshooting
............................. 70
R
RAPID
Troubleshooting
............................. 70
RAPID C2 Installation CD ................... 23
RAPID Video
Troubleshooting
............................. 69
RAPID Workstation
connecting
..................................... 20
RecorderPouch .................................... 14
registration .......................................... 28
RoHs ................................................... 35
S
SB SensorBelt
...................................... 14
SensorArray .................................. 14, 67
Cleaning ........................................ 67
Troubleshooting ............................. 69
SensorBelt
Cleaning
........................................ 67
setting the voltage of APID Workstation 18
sketch
Dell Minitower
.............................. 19
System Administration ......................... 31
System Log ......................................... 33
T
Temperature limits
............................... 35
Type BF equipment .............................. 35
U
User Account, delete
............................ 32
User, add new ...................................... 32
User, define a ....................................... 31
V
voltage
Given Workstation
......................... 18
Voltage Select Switch .......................... 18
W
Wide Screen Compatibility
................... 30
Workstation
Troubleshooting
............................. 70
Workstation Manager ........................... 32